Note: You are viewing an old revision of this page. View the current version.

Support HammondWiki. Donate!
PayPal

Replacement upstop felts are available from Trek. They're cheap and worth every penny. See:

http://www.trekii.com/KBF1.html

To replace the upstop felts:

  1. Protect the organ case with some cardboard and raise the manual (see HowToRaiseTheManuals).
  2. Remove the six screws which hold the FrontStrip to the manual, then remove the FrontStrip. It is held on with some double-sided tape, so you will have to gently pry it off. (All the keys will pop up --- whee.)
  3. Pull the old upstop felt off of the front strip.
  4. Use some adhesive remover and a plastic scraper to clean off the remains of the old glue and felt.
  5. Stick on the new felt.
  6. Reinstall the front strip.

TopicRepair

The content of this page is Copyright (C) 2000, 2001, 2002 Geoffrey T. Dairiki and the other authors of the content, whoever they may be.
This is free information and you are welcome redistribute it under certain conditions; see http://www.dairiki.org/HammondWiki/opl.html for details.
Absolutely no warrantee is made as to the correctness of the information on this page.