Differences between version 10 and previous revision of Leslie122Hookup.

Other diffs: Previous Major Revision, Previous Author

Newer page: version 10 Last edited on January 31, 2007 2:55 pm. by
Older page: version 7 Last edited on January 25, 2007 2:27 pm. by
@@ -42,8 +42,11 @@
  
 FrankZueckmantel has provided [these pictures|http://www.dairiki.org/hammond/pics/4Hkit.pdf] of the inside and outside of a *4H kit*, as well as pictures detailing the wiring of the [half-moon switches|HalfMoonSwitch] from a *4H* and a *3M* kit. 
 ------ 
 !Hooking a 122 to a spinet 
+  
+The 122 was designed nominally to connect to Hammond console organs which have balanced [G-G] outputs.  
+Hammond spinets and other brands of organs do not have balanced outputs. This complicates matters somewhat.  
  
 Here's the schematic of a 3M kit, which is used to hook a "122 tremolo control kit" (see above) to a spinet. If you are clever, you can figure out, from this schematic, how to hook a 122 to a spinet without the main-echo switching. 
  
 [http://www.dairiki.org/hammond/pics/3Mcontrol.gif] 

The content of this page is Copyright (C) 2000, 2001, 2002 Geoffrey T. Dairiki and the other authors of the content, whoever they may be.
This is free information and you are welcome redistribute it under certain conditions; see http://www.dairiki.org/HammondWiki/opl.html for details.
Absolutely no warrantee is made as to the correctness of the information on this page.