Differences between version 10 and previous revision of HowtoAdjustThePreampDriveLevel.

Other diffs: Previous Major Revision, Previous Author

Newer page: version 10 Last edited on January 21, 2018 3:58 pm. by
Older page: version 9 Last edited on August 11, 2011 8:37 pm. by
@@ -39,6 +39,4 @@
  
 __The test__: To test your freshly adjusted organ and Leslie - If you have it adjusted for a slight distortion at maximum volume, the distortion should disappear or be greatly reduced by simply pushing in the first two drawbars 2 clicks to position 6. It should still be very loud and very clean, but should have no distortion. The desired result is to have some HammondGrowl on demand, and a clean organ sound at other times. 
  
 ------- 
-__Trek Solid-State Preamp__  
-Organs with solid-state Trek-II preamp should be set almost the same way, but the max drive level on the preamp is adjusted with the volume pot attached to the swell pedal control arm. Loosen the set screw and use a small screwdriver to turn the pot within the arm - do not remove the arm. All other adjustments are the same.  

The content of this page is Copyright (C) 2000, 2001, 2002 Geoffrey T. Dairiki and the other authors of the content, whoever they may be.
This is free information and you are welcome redistribute it under certain conditions; see http://www.dairiki.org/HammondWiki/opl.html for details.
Absolutely no warrantee is made as to the correctness of the information on this page.