Differences between version 9 and previous revision of LineOutFromASpinet.

Other diffs: Previous Major Revision, Previous Author

Newer page: version 9 Last edited on October 16, 2022 3:57 am. by 2a02:a03f:8344:a600:9d08:1986:f3c0:8aee
Older page: version 8 Last edited on May 27, 2011 6:18 am. by
@@ -23,8 +23,12 @@
  
 TonyRodrigues and BruceBarnes report that if you increase the value of the internal coupling capacitor which connects to this jack it works better (as an output). Read Tony's report at [GettingALineOutFromThePhonoJack]. (I, personally, would not recommend this approach. --JeffDairiki) 
  
 I posted another variation at [GettingALineOutFromThePhonoJack]. -- Doug Williams 
+  
+Experience says you should not mess up with the capactive volume box **** That Phono Plug on the Swell Capacitor Housing *** .. it will always disturb the frequency curve of the system aswell the volume of the output , since the whole curcuit is at a very high impedance in the mega Ohm range Benji Massy  
+  
+  
  
 -------- 
 TopicHookup 
 TopicModification 

The content of this page is Copyright (C) 2000, 2001, 2002 Geoffrey T. Dairiki and the other authors of the content, whoever they may be.
This is free information and you are welcome redistribute it under certain conditions; see http://www.dairiki.org/HammondWiki/opl.html for details.
Absolutely no warrantee is made as to the correctness of the information on this page.