Note: You are viewing an old revision of this page. View the current version.
The lower bearing might be a 
NTN # 6200 LB (Also: Fafnir 200PP)
(McMasterCarr 5972K41 ?) (10mm bore, 30mm diameter, 9mm thick, two seals).
The lower rotor bearing should include a 5/16 washer in between the wooden rotor and the bearing.
The upper bearing: MRC 35FF (5mm bore, 19mm diameter, 6mm thick, two shields).
On a Leslie710, you can replace both bearings with ball bearings from FAG. Type 6200.2RSR. Ball bearings are standardized industry parts, so a second source type is no problem at all.
The content of this page is Copyright (C) 2000, 2001, 2002 Geoffrey T. Dairiki and
the other authors of the content, whoever they may be.
This is free information and you are welcome redistribute it
under certain conditions; see
http://www.dairiki.org/HammondWiki/opl.html for details.
Absolutely no warrantee is made as to the correctness of
the information on this page.