Note: You are viewing an old revision of this page. View the current version.
The Duet Sixteen preset kit was manufactured by the Electro Tone Corporation in the 1960s as an after-market add-on for Hammond M-2 and M-3 spinet organs. The Duet Sixteen was not suitable for Hammond M organs, but could be fitted to M-100 series and L-100 series, even though these models already had Hammond factory presets. For Hammond M organs, Electro Tone Corporation manufactured the Electro Tone Mark II preset kit, as well as manufacturing the Electro Tone OrganMate reverb kit for any Hammond organ requiring reverb and the Electro Tone PER 200 percussion kit.
Cable #1 (Upper Drawbars)
* 9 wires (brown, red, orange, yellow, green, blue, violet, grey, white) * Terminals on lower rotary switch cluster. * Terminals vertically aligned. * Terminals adjacent to cable #5 terminals. * Terminals directly opposite side of switch to cable #3 terminals. * Terminals aligned directly below cable #2 terminals.
Cable #2 (Lower Drawbars)
* 7 wires (brown, red, orange, yellow, green, blue, violet) * Terminals on upper rotary switch cluster. * Terminals vertically aligned. * Terminals directly opposite side of switch to cable #4 terminals. * Terminals aligned directly above cable #1 terminals.
Cable #3 (Upper Drawbar Wires)
* 9 wires (brown, red, orange, yellow, green, blue, violet, grey, white) * Terminals on lower rotary switch cluster. * Terminals vertically aligned. * Terminals directly opposite side of switch to cable #1 terminals. * Terminals aligned directly below cable #4 terminals.
Cable #4 (Lower Drawbar Wires)
* 7 wires (brown, red, orange, yellow, green, blue, violet) * Terminals on upper rotary switch cluster. * Terminals vertically aligned. * Terminals directly opposite side of switch to cable #2 terminals. * Terminals aligned directly above cable #3 terminals.
Cable #5 (Right Side Input (Matching) Transformer)
* 7 wires (red, orange, yellow, green, blue, violet, grey) * Terminals on lower rotary switch cluster. * Terminals vertically aligned, except for yellow wire. * Terminals adjacent to cable #5 terminals.
Cable #6 (Left Side Input (Matching) Transformer)
* 7 wires (red, orange, yellow, green, blue, violet, grey) * Terminals on upper rotary switch cluster. * Orange, yellow, green, blue & grey terminals vertically aligned. * Red & violet terminals vertically aligned, and grouped with cable #4 wires
The content of this page is Copyright (C) 2000, 2001, 2002 Geoffrey T. Dairiki and
the other authors of the content, whoever they may be.
This is free information and you are welcome redistribute it
under certain conditions; see
http://www.dairiki.org/HammondWiki/opl.html for details.
Absolutely no warrantee is made as to the correctness of
the information on this page.