Differences between version 5 and previous revision of AddingFoldbackToASpinet.

Other diffs: Previous Major Revision, Previous Author

Newer page: version 5 Last edited on February 1, 2011 8:17 pm. by
Older page: version 4 Last edited on February 15, 2003 7:17 am. by
@@ -1,10 +1,10 @@
 There are (at least) two ways to add [HarmonicFoldback] to [SpinetOrgans]: 
-* The FullFoldbackMod: Generally, adding full foldback to a spinet requires the addition of some missing key contacts, and perhaps the replacement of some non-full-length buss bars. Thus a donor organ, or some other supply of parts is required. 
+* The FullFoldbackMod: Generally, adding full foldback to a spinet requires the addition of some missing key contacts. M2 and M3 spinets require the replacement of (at least) three non-full-length buss bars. Thus a donor organ, or some other supply of parts is required. M100 and L100 series usually have full-length busbars and need only the "missing" contacts to add foldback . 
 * PoorMansFoldback: some spinets (eg. those with percussion, like the M3's) already have ''some'' of the contacts which are required for the addition of foldback. (These contacts are required for triggering the [Percussion].) In this case, one can add partial foldback (eg. only on the upper drawbar on the upper manual) without adding any extra parts. 
 ------ 
  
 Other related projects: 
 * M-100's and L-100's have slots for ten busbars. One can thus [AddATenthSetOfContacts]. 
  
 ------ 
 TopicModification 

The content of this page is Copyright (C) 2000, 2001, 2002 Geoffrey T. Dairiki and the other authors of the content, whoever they may be.
This is free information and you are welcome redistribute it under certain conditions; see http://www.dairiki.org/HammondWiki/opl.html for details.
Absolutely no warrantee is made as to the correctness of the information on this page.