HammondWiki - Diff: Adding 4th, 5th, and 6th Harmonic Percussion

Differences between version 2 and previous revision of Adding 4th, 5th, and 6th Harmonic Percussion.

Other diffs: Previous Major Revision, Previous Author

Newer page: version 2 Last edited on April 24, 2011 2:59 pm. by
Older page: version 1 Last edited on April 4, 2011 3:26 pm. by
@@ -93,8 +93,9 @@
  When S2 is in the CENTER position the 5th harmonic is selected. 
  When S2 is UP the 6th harmonic is selected. 
 </verbatim> 
  
-The B3 percussion switch must be on for the 4th, 5th and 6th harmonics to work. __ When the B3 percussion switch is off, switch S1 must also be off__ so that the 4th, 5th and 6th harmonic drawbar signals do not go to the input of the AO28 percussion amplifier .  
-  
+<br>  
+__ADDED BONUS---ParadiseButton FOR 4th, 5th and 6th HARMONIC PERCUSSION__<br>  
+ The B3 percussion switch must be on for the 4th, 5th and 6th harmonics to work. When the B3 percussion switch is off, you automatically go into the ParadiseButton mode for the 4th, 5th and 6th Harmonics. In this mode the percussion will not decay and the 4th, 5th and 6th harmonics (depending on the selection of S2) will sound much louder. If the ParadiseButton mode is not desired, just turn off S1 . 
  
 !—JohnMihevic 

The content of this page is Copyright (C) 2000, 2001, 2002 Geoffrey T. Dairiki and the other authors of the content, whoever they may be.
This is free information and you are welcome redistribute it under certain conditions; see http://www.dairiki.org/HammondWiki/opl.html for details.
Absolutely no warrantee is made as to the correctness of the information on this page.